- January 11, 2010
- Category: Suspension
- Written By: Chris
- No Comments
About two months ago marked the end of my KSport coil overs on my 06 TSX. It seems I had fell victim to the quality issues that many reviews have pointed out. Today I want to give my final verdict and opinion on the KSport coil overs I had and why I had to get rid of them.
Clunky and Loud
While the KSports’ offer a great price to ride ratio they tend to be a bit loud in the cabin. I could drive over a pebble and the thump inside the cabin was more like hitting a 3 inch deep pot hole. Granted the suspension is stiff making the springs hard to flex and the frame was taking most of the impact which would explain the harsh noises. However; those running Tein Flex which is also very stiff have no complaints of obtrusive cabin noise. The Flex also comes with Tein’s "silencing rubber" between the tightest coils which they claim reduces that cabin noise. None the less, Tein Flex is nearly twice as expensive as the Kontrol Pro’s.
Aggressively Stiff
The Kontrol Pro’s are incredibly stiff which is great for track driving or hitting the back roads, but for the daily commute a softer ride is always a welcome luxury. You can get custom spring rates straight from the factory, however; that seems counter intuitive. By the time you pay for your custom springs on your KSports you had might as well picked up some Buddy Club N+ or Tein CS. If you’re looking to run stiff on the track and back roads then the KSports are the coil overs for you.
Lock Rings Seized Up
Ah, the real reason why I ditched the KSports. Not that long ago I had to pick up a set of new tires. Being new, these tires had a lot more tread which lead to having to raise the car back up a bit to prevent rubbing. When I went to pop the lock ring in the back it wouldn’t come loose. I hit it with a screw driver, a mallet, the "keys," I heated them with a torch, I cooled them with ice. I shot them with PB Blaster, silicon spray and WD–40, nothing worked.
I can’t entirely blame this on the coil over. Living in Oregon the DOT sprays the roads with de-icer during the winter which can have very negative side effects on almost all of your cars moving parts, including lock rings. With a little more preventative maintenance this could have possibly been avoided. However; one side of me feels that the part should have been made with enough quality to not require any kind of maintenance. I have to remember that all aftermarket parts for vehicles are intended for "off-road purposes only" meaning that they are intended for track conditions and fair weather.
Conclusion
I ended up pulling the KSports off and putting my OEM struts with Tein H–Tech springs back on. Granted I am about an inch higher off the ground now I could not be more satisfied. The ride is much softer, no more clunks and thumps and the car drives more like a it did from the factory. The Tein’s offer a nice compromise between performance and comfort, the next step would just be adding some Koni Yellows for additional adjustments.
I've been driving and modding Honda's for years. I started with a '99 Accord V6 Coupe, '01 Acura MDX, and now a '06 Acura TSX. On behalf of myself and everyone at JDMLove thanks for stopping by and reading some posts! We appreciate your support!


















Leave A CommentNo comments yet