• February 10, 2009
• Category: DIY, Subaru
• Written By: Chris
• No Comments

TSX: Installing The CT Short Shifter

This is a topic that hasn’t been written about all too much since the CT instructions are pretty detailed and easy to follow. However; there are some tips and tricks to making the whole things go more smoothly. I’ll follow our typical DIY set up with the tools you need etc.. and step by step instructions, however in some spots I’ll just urge you to read the CT instructions. If you have additional questions feel free to post a comment!

• January 19, 2009
• Category: DIY
• Written By: Chris
• No Comments

TSX: Install the CT Engineering Rear Sway Bar

There is a common misconception floating around that you have to remove the exhaust to install a rear sway bar on the TSX. This is simply not true, I have done it a good 3 or 4 times without removing the exhaust at all and I’ll tell you how to do it in this tutorial. Be sure to give yourself at least an hour for this install.

• January 15, 2009
• Category: Intake and Exhaust
• Written By: Chris
• 4 Comments

CT Ice Box Intake vs Injen SP1431 Intake

In the world of import intakes there are three major variations:

• Box intakes
• Cold Air Intakes (CAI)
• Short Ram Intakes (SRI)

All three have their key advantages and disadvantages, CAI is good for high end gain but tends to lack in the low end and can lead to hydro lock, SRI’s are good for low end response but lack in the high end and are prone to heat soak, and box style intakes sit right in the middle of the road, good low end response, better than SRI high end gain, and not as prone to hydro lock.