Posts Tagged ‘DIY’
-
- February 23, 2009
- Category: General
- Written By: Chris
- No Comments
On January 21st our very own Monopoly Man wrote a post on swapping an H22 engine into a 90-93 Accord. Since then this post has seen over 135 page views! Making it our most view post so far. Monopoly Man wrote an excellent post with step by step instructions on swapping a H22 engine into a 90 – 93 Honda Accord. His write up is both detailed and extremely factual. I recommend you take a look even if you don’t have an Accord to get some tips and tricks from one of our resident experts.
Continue Reading » -
- February 12, 2009
- Category: DIY
- Written By: Chris
- No Comments
I remember when I first started modding cars years ago that HID retrofit kits were far and few between and terribly expensive at that. Today, retrofit kits can be had for under $100.00! Amazing what technology and Chinese manufacturing can do. What I want to do is show you how to install them properly to avoid blowing them out, flickering, or overheating. Some of these images will be coming from my cardomain page for my MDX when I still had it. The images are mine, the hands you see are mine. Lets get started!
Continue Reading » -
- January 19, 2009
- Category: DIY
- Written By: Chris
- No Comments
There is a common misconception floating around that you have to remove the exhaust to install a rear sway bar on the TSX. This is simply not true, I have done it a good 3 or 4 times without removing the exhaust at all and I’ll tell you how to do it in this tutorial. Be sure to give yourself at least an hour for this install.
Continue Reading » -
- January 16, 2009
- Category: DIY
- Written By: Chris
- No Comments
I call this the poorman’s iPod adapter because all that is need to make this work is a standard iPod dock that ships with most iPod classic models and previous generations and a $10.00 male to male auxiliary line. So if you are on a budget or don’t want to spend $50.00+ on iPod integration then this is for you.
Continue Reading »

















